HAI UN PRODOTTO DA TESTARE E CERTIFICARE?
Scopri la gamma completa di test e analisi del Laboratorio QUALILAB
In questa pagina trovi una panoramica dettagliata e tutta la gamma completa di test e analisi tecniche che il Laboratorio di QUALILAB esegue con precisione e affidabilità.
Ogni metodo è il frutto della nostra esperienza e del costante aggiornamento tecnico, per garantire risultati accurati e conformi agli standard più elevati.
Non trovi il test che cerchi?
Nessun problema: contatta il nostro team di esperti per una consulenza personalizzata o per verificare la disponibilità di ulteriori metodi analitici.
| STANDARD | TITOLO |
| AGCO GC10700601 | electrical requirements and environmental conditions for electrical/electronic components |
| ANSI C136.31 | American National Standard for Roadway and Area Lighting Equipment – Luminare Vibration |
| ANSI C78.377 | Electric Lamps – Specifications For The Chromaticity Of Solid-State Lighting Products |
| ANSI Z80.36 | Ophthalmics – Light Hazard Protection For Ophthalmic Instruments |
| ANSI/IES LM-79-24 | Approved Method: Optical And Electrical Measurements Of Solid-State Lighting Products |
| ANSI/IES LM-80-20 | Approved Method: Measuring Luminous Flux And Color Maintenance Of LED Packages, Arrays, And Modules |
| ANSI/IES LM-82-20 | Approved Method: Characterization Of LED Light Engines And LED Lamps For Electrical And Photometric Properties As A Function Of Temperature |
| ANSI/IES LM-84-20 | Measuring Luminous Flux And Color Maintenance Of LED Lamps, Light Engines, And Luminaires |
| ANSI/IES RP 27.1-22 | Recommended Practice: Risk Group Classification And Minimization Of Photobiological Hazards From Ultraviolet Lamps And Lamp Systems |
| ANSI/IES RP-27.3-17 | Recommended Practice for Photobiological Safety for Lamps – Risk Group Classification and Labeling |
| ANSI/IES RP-27-20 | Recommended Practice: Photobiological Safety For Lighting Systems |
| ANSI/IES TM-21-21 | Projecting Long-Term Luminous, Photon, And Radiant Flux Maintenance Of LED Light Sources |
| ANSI/IES TM-28-20 | Projecting Long-Term Luminous Flux Maintenance Of LED Lamps And Luminaires |
| ASABE S276.8 | Slow-Moving Vehicle Identification Emblem |
| ASTM B 487-85 | Standard Test Method for Measurement of Metal and Oxide Coating Thikness by Microscopical Examination of a Cross Section |
| ASTM G85-19 | Seawater acidified test, cyclic (SWAAT TEST) |
| AUDI VR-EG-71-2-081 | Abrollprüfung |
| AUDI VR-EG-71-2-091 | Biegeumlaufprüfung |
| BMW GS 95002-2 | Motor vehicles – Electromagnetic Compatibility (EMC) – Requirements and tests on components |
| BMW GS 95024-2 | Electrical and electronic components in motor vehicles – Electrical requirements and testings |
| BMW GS 95024-3-1 | electrical and electronic components in motor vehicles – environmental requirements and testings |
| BMW PR 266 | TS Lights for exterior mount |
| BMW QV 36 026 | Cast / forged aluminium wheels / Aluguss / Schmiederäder |
| CIE 15 | Technical Report: Colorimetry, 3rd edition |
| CIE 70 | The measurement of absolute luminous intensity distributions |
| CISPR25 | Vehicle, boats and internal combustion engines – Radio disturbance characteristics – Limits and method of measurment for the protection of on-board receivers |
| CLAAS CN 05 0215-1 | CLAAS Environmental requirements for electrical and electronic components |
| CMVSS 108 | TECHNICAL STANDARDS DOCUMENT – No. 108 Lamps, Reflective Devices, and Associated Equipment |
| CNH CNS0310 | Engineering Specification – Environmental Test Specification – Electronic Components |
| Commission Delegated Regulation (EU) 2019/2015 | ECODESIGN energy labelling of light sources |
| Commission Delegated Regulation (EU) 2021/340 | ECODESIGN energy labelling requirements for electronic displays, household washing machines and household washer-dryers, light sources, refrigerating appliances, household dishwashers, and refrigerating appliances with a direct sales function |
| DIN 50018 | Sulfur dioxide corrosion testing in a saturated stmosphere |
| DIN 50916-2 | Testing of copper alloys – Stress corrosion cracking test using ammonia – Part 2: Testing of components |
| DIN 75220 | ageing of automotive components in solar simulation units |
| Ducati DMH 34-03.001 | Dispositivi Elettrici ed Elettronici – Capitolato |
| EASA – PTS-VPT-DSN | Vertiports |
| EASA CS-ADR-DSN | Certification Specifications and Guidance Material for Aerodrome Design |
| EASA CS-HPT-DSN | Easy Access Rules for Aerodromes |
| EN 12352 | Traffic control equipment – Warning and safety light devices |
| EN 12368 | Traffic control equipment – Signal heads |
| EN 12899-1 | Fixed, vertical road traffic signs – Part 1: Fixed signs |
| EN 12899-3 | Fixed, vertical road traffic signs – Part 3: Delineator posts and retroreflectors |
| EN 13201-1 | Road lighting – Part 1: Guidelines on selection of lighting classes |
| EN 13201-2 | Street lighting – Part 2: Performance requirements |
| EN 13201-3 | Street Lighting – Part 3: Performance Calculation |
| EN 13201-4 | Road lighting – Part 4: Methods of measuring lighting performance |
| EN 13201-5 | Street Lighting – Part 5: Energy Performance Indicators |
| EN 13422 | Traffic Signs – Cones and Cylinders |
| EN 1463-1 | Road marking materials – Retroreflecting road studs – Initial performance requirements |
| EN 14744 | Inland navigation vessels and sea-going vessels – Navigation light |
| EN 15153-1 | Railway applications – External visible and audible warning devices – Part 1: Head, marker and tail lamps for heavy rail |
| EN 1838 | Application of lighting technology – Emergency lighting |
| EN 50121-3-2 | Railway applications – Electromagnetic compatibility – Part 3-2: Rolling stock – Apparatus |
| EN 50121-4 | Railway applications – Electromagnetic compatibility – Part 4: Emission and immunity of the signalling and telecommunications apparatus |
| EN 50130-4 | Alarm systems – Part 4: Electromagnetic compatibility – Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems |
| EN 50131-4 | Alarm systems – Intrusion and hold-up systems – Part 4: Warning devices |
| EN 54-17 | Fire detection and fire alarm systems – Part 17: Short-circuit isolators |
| EN 54-18 | Fire detection and fire alarm systems – Part 18: Input/output devices |
| EN 54-23 | Fire detection and fire alarm systems – Part 23: Fire alarm devices – Visual alarm devices |
| EN 54-3 | Fire detection and fire alarm systems – Part 3: Fire alarm devices – Sounders |
| EN 55011 | Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement |
| EN 55015 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
| EN 55022 | Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement |
| EN 55032 | Electromagnetic compatibility of multimedia equipment – Emission Requirements |
| EN 55035 | Electromagnetic compatibility of multimedia equipment – Immunity requirements |
| EN 60068-2-1 | Environmental testing – Test Ka: Salt mist |
| EN 60068-2-27 | Environmental testing – Test Ea and guidance: Shock |
| EN 60068-2-42 | Environmental testing – Test Kc: Sulphur dioxide test for contacts and connections |
| EN 60068-2-6 | Environmental testing – Test Fc: Vibration (sinusoidal) |
| EN 60068-2-60 | Environmental testing – Test Ke: Flowing mixed gas corrosion test |
| EN 60068-2-64 | Environmental testing – Test Fh: Vibration, broadband random and guidance |
| EN 60068-2-80 | Environmental testing – Test Fi: Vibration – Mixed mode |
| EN 60601-1-2 | Medical electrical equipment – Part 1-2: General requirements for basic safety and essential performance – Collateral Standard: Electromagnetic disturbances – Requirements and tests |
| EN 61000-3-2 | Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
| EN 61000-3-3 | Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection |
| EN 61000-4-11 | Electromagnetic compatibility (EMC) – Part 4-11: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
| EN 61000-4-2 | Electromagnetic compatibility (EMC) – Part 4-2: Testing and measurement techniques – Electrostatic discharge immunity test |
| EN 61000-4-3 | Electromagnetic compatibility (EMC) – Part 4-3 : Testing and measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test |
| EN 61000-4-4 | Electromagnetic compatibility (EMC) – Part 4-4: Testing and measurement techniques – Electrical fast transient/burst immunity test |
| EN 61000-4-5 | Electromagnetic compatibility (EMC) – Part 4-5: Testing and measurement techniques – Surge immunity test |
| EN 61000-4-6 | Electromagnetic compatibility (EMC) – Part 4-6: Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields |
| EN 61000-4-8 | Electromagnetic compatibility (EMC) – Part 4-8: Testing and measurement techniques – Power frequency magnetic field immunity test |
| EN 61000-6-1 | Electromagnetic compatibility (EMC) – Part 6-1: Generic standards – Immunity standard for residential, commercial and light-industrial environments |
| EN 61000-6-2 | Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity standard for industrial environments |
| EN 61000-6-3 | Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission standard for equipment in residential environments |
| EN 61000-6-4 | Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments |
| EN 61326-1 | Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements |
| EN 61326-2 | Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-2: Particular requirements – Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems |
| EN 61341 | Method of measurement of centre beam intensity and beam angle(s) of reflector lamps |
| EN 61373 | Railway applications – Rolling stock equipment – Shock and vibration test |
| EN 61496-1 | Safety of machinery – Electro-sensitive protective equipment – Part 1: General requirements and test |
| EN 61547 | Equipment for general lighting purposes – EMC immunity requirements |
| EN 62471 | Photobiological Safety Of Lamps And Lamp Systems |
| EN IEC 60598-1 | Luminaires – Part 1: General requirements and tests |
| EN ISO 20471 | High visibility clothing – Test methods and requirements |
| EN ISO 6988 | Metallic and other non organic coatings – Sulfur dioxide test with general condesation of moisture |
| FCA CS.00056 | Environmental specification For electrical/electronic(E/E) components |
| FCA CS00054 | General Electrical and EMC Performance Requirements for E/E Components |
| FCA MS.90053 | Organic coatings performance requirements for painted interior parts |
| FCA MS.90096 | Coatings systems for wheels and wheel trim components |
| FCA MS.90102 | Organic coatings performance requirements for exterior add on parts |
| FCA MS.90131 | PRIMER (ED) PERFORMANCE REQUIREMENTS FOR EXTERIOR PARTS |
| FCA MS.90152 | Tape Double coated pressure sensitive adhesive |
| FCA PF.90005 | SILL CLADDINGS, DOOR CLADDINGS, BODY SIDE MODINGS AND FLARES |
| FCA PF.90045 | Flocking on on metallic materials for automotive interior surfaces |
| FCA PF.90048 | WHEEL TRIM FUNCTIONAL AND PERFORMANCE REQUIREMENTS |
| FCA PF.90062 | Fascia & grille assemblies performance |
| FCA PF.90131 | FUNCTION PERFORMANCE SPECIFICATION FOR INTERIOR HARD TRIM |
| FCA PF.90155 | AERODYNAMIC UNDERBODY SHIELDS PERFORMANCE STANDARD |
| FCA PF.90249 | Wheels – Aluminum Alloy And Steel |
| FCA PF.90249 | Ruote Alluminio e Acciaio |
| FCS LP.7F013 | Aluminum Alloy Wheels Rim Flange Deformation Test |
| FERRARI DT.A.S.C. 00008 | Prova di Fatica Dinamica Radiale su Cerchi Ruota |
| FERRARI DT.A.S.C. 00009 | Prova di Flessione rotante su Cerchi Ruota |
| FERRARI DT.A.S.C. 00010 | Cedimento balconate Ruote in Lega |
| Ferrari I.Q. 00360 | Colpo di calore su cerchio ruota verniciato |
| Ferrari I.Q. 00372 | Verifica resistenza corrosione cupro-salino-acetica su cerchio ruota verniciato |
| FIAT 50180 | Prove di corrosione |
| FIAT 50184 | Prove climatiche |
| FIAT 50433/01 | Determinazione della resistenza alla combustione dei materiali non metallici per particolari esterni di carrozzeria autoveicoli |
| FIAT 50451 | Invecchiamento accelerato agli agenti atmosferici |
| FIAT 50488/01 | Resistenza ai colpi di pietra |
| FIAT 50758 | Misurazione dello spessore dei rivestimenti metallici e degli strati di ossido protettivi |
| FIAT 7-B8004 | Alloy Wheels Rim Flange Yield Test |
| FIAT 7-B8004 | Ruote in Lega Cedimento Balconate |
| FIAT 7G-2000 | Resistenza alla combustione di materiali non metallici per parti interne dell’abitacolo |
| FIAT 7-G2000 | Determinazione della resistenza alla combustione dei materiali non metallici per particolari interno abitacolo o autoveicoli |
| FIAT 9.02350/01 | Ruote In Lega Leggera Per Vetture, Derivati e Veicoli Commerciali |
| FIAT 9.02350/01 | Light Alloy Wheels For Passenger Cars,Derived Vehicles And Commercial Vehicles |
| FIAT 9.03109 | Paraurti e rivestimenti per paraurti in materiali non metallici |
| FIAT 9.03147 | Finizioni autoadesive e/o a fissaggio ibrido |
| FIAT 9.07301 | Ripari aereodinamici e/o acustici sottomotore e sottopianale |
| FIAT 9.55253 | Particolari vari in materiale plastico |
| FIAT 9.55368 | Nastri adesivi |
| FIAT 9.55455 | Floccatura su materiali plastici per elementi interno vettura |
| FIAT 9.55710 | Adesivo per incollaggio poliestere rinforzato con fibre di vetro |
| FIAT 9.55738 | Adesivi base gomma per incollaggio materiali plastici |
| FIAT 9.55842 | Verniciatura di particolari metallici vari |
| FIAT 9.55842/01 | Finiture estetiche e funzionali per particolari in materiale plastico ottenuto mediante verniciatura o altri processi |
| FMVSS 108 | § 571.108 Standard No. 108; Lamps, reflective devices, and associated equipment. |
| FMVSS 302 | Flammability of Automotive Materials |
| FORD S95BB-1007-AA | Cast Aluminium Wheel |
| HYUNDAI ES52910-03 | Aluminium Wheel Test |
| ICAO Annex 14 Aerodromes vol I | Aerodrome Design and Operations |
| ICAO Annex 14 Aerodromes vol II | Heliports |
| ICAO DOC 9261 | Offshore Heliport Manual |
| IEC 60598-2-22 | Particular requirements – Luminaires for emergency lighting |
| IEC 60601-2-41 | Medical electrical equipment – Part 2-41: Particular requirements for the basic safety and essential performance of surgical luminaires and luminaires for diagnosis |
| IEC 60969 | Self-ballasted compact fluorescent lamps for general lighting services – Performance requirements |
| IEC 61199 | Single-capped fluorescent lamps – Safety specifications |
| IEC 61347-1 | Controlgear for electric light sources – Safety – Part 1: General requirements |
| IEC 62471 | Photobiological Safety Of Lamps And Lamp Systems |
| IEC 62471-3 | Photobiological safety of lamps and lamp systems – Part 3: Guidelines for the safe use of intense pulsed light source equipment on humans |
| IEC 62471-7 | Photobiological safety of lamps and lamp systems – Part 7: Light sources and luminaires primarily emitting visible radiation |
| IEC 62717 | LED modules for general lighting – Performance requirements |
| IEC 62722-1 | Luminaire performance – Part 1: General requirements |
| IEC 62722-2-1 | Luminaire performance – Part 2-1: Particular requirements – LED luminaires |
| IEC TR 62778 | Application Of IEC 62471 For The Assessment Of Blue Light Hazard To Light Sources And Luminaires |
| ISO 10605 | Road vehicles – Test methods for electrical disturbances from electrostatic discharge |
| ISO 11452-1 | Road vehicles – Component test methods for electrical disturbances from narroband readiated electromagnetic energy – General principles and terminology |
| ISO 11452-2 | Road vehicles – Component test methods for electrical disturbances from narroband readiated electromagnetic energy – Absorber-lined shielded enclosure |
| ISO 11452-4 | Road vehicles – Component test methods for electrical disturbances from narroband readiated electromagnetic energy – Harness excitation methode |
| ISO 11452-5 | Road vehicles – Component test methods for electrical disturbances from narroband readiated electromagnetic energy – Stripline |
| ISO 11452-8 | Road vehicles – Component test methods for electrical disturbances from narroband readiated electromagnetic energy – Immunity to magnetic field |
| ISO 11452-9 | Road vehicles – Component test methods for electrical disturbances from narroband readiated electromagnetic energy – Portable transmitters |
| ISO 13766-1 | Earth-moving and building construction machinery – Electromagnetic compatibility (EMC) of machines with internal electrical power supply – Part 1: General EMC requirements under typical electromagnetic environmental conditions |
| ISO 13766-1 | Earth-moving and building construction machinery – Electromagnetic compatibility (EMC) of machines with internal electrical power supply – Part 2: Additional EMC requirements for functional safety environmental conditions |
| ISO 14982 | Agricultural and forestry machinery – Electromagnetic compatibility – Test methods and acceptance criteria |
| ISO 16750-2 | Road vehicles – Environmental conditions and testing for electrical and electronic equipment – Electrical loads |
| ISO 16750-3 | Road vehicles – environmental conditions and testing for electrical and electronic equipment – mechanical loads |
| ISO 16750-3 | Road vehicles – Environmental conditions and testing for electrical and electronic equipment – Par 3: Mechanical loads |
| iso 20567-1 | Multi-impact testing |
| ISO 2808 | Paints and varnishes – Determination of film thickness |
| ISO 3006 | Road vehicles – Passenger car wheels for road use – Test methods |
| ISO 30061 | Emergency lighting |
| ISO 3795 | Road vehicles, and tractors and machinery for agriculture and forestry – Determination of burning behaviour of interior materials |
| ISO 3864-1 | Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs and safety markings |
| ISO 6742-1 | Cycles — Lighting and retro-reflective devices — Part 1: Lighting and light signalling devices |
| ISO 6957 | Copper alloys – Ammonia test for stress corrosion resistance |
| ISO 7141 | Road vehicles – Light alloy wheels – Impact test |
| ISO 7637-1 | Road vehicles – Electrical disturbances from conduction and coupling – Definitions and general considerations |
| ISO 7637-2 | Road vehicles – Electrical disturbances from conduction and coupling – Electrical transient conduction along supply lines only |
| ISO 7673-3 | Road vehicles – Electrical disturbances from conduction and coupling – Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
| JAGUAR | Road wheel Fatigue Rig Test |
| Jaguar JLR-EMC-CS | Electromagnetic Compatibility Specification for Electrical/Electronic Components and Subsystems |
| Jaguar Land Rover TPJLR.04.033 | Road Wheel Radial Fatigue Test Procedure |
| Jaguar Land Rover TPJLR.04.102 | Road Wheel Inner Flange Strength Test |
| JCB STD00140 | Environmental test requirements for electrical/electronic components |
| LAND ROVER LRES.48.01.006 | Road Wheel Strength and Durability Acceptance Tests |
| McLaren MSL.03.01.0031 | Wheels – Inner Rim Impact Rig Testing |
| McLaren MSL.03.01.0032 | Wheels – Outer Rim Impact Rig Testing |
| McLaren MSL.03.01.0033 | Wheels – Radial Fatigue Rig Testing |
| McLaren MSL.03.01.0034 | Wheels – Cornering Fatigue Rig Testing |
| McLaren MSL.03.04.0063 | EMC and Electrical Performance Requirements – Component Tests |
| Mercedes MBN 10284-2 | EMC Requirements – Component Tests (Passenger Car and Vans) |
| Mercedes MBN 10567 | Electric and Electronic Componets in Motor Vehicles – 12 V On-Board Electrical System – Requirements and Tests |
| Mercedes MBN LV 124 | electrical and electronic components in motor vehicles up to 3,5 t – general requirements, test conditions and tests |
| Mercedes-Benz A 001 009 14 99 | Aluminiun Disk-type Wheel Strength and Function Test / Festigkeits- u. Funktionsprüfungen für Al-Scheibenräder |
| MIL 810F | Environmental engineering considerations and laboratory tests |
| Piaggio 7431 | Electronic Devices |
| PSA B21 7110 | Environment Specifications for Electrical and Electronic Equipments – Electrical Characteristics |
| Renault 36-00-808 | Resistance to Electrical Disturbances and Electromagnetic Compatibility – Instruction concerning electrical, electronic and pyrotechnic equipment |
| SAE J1319 | Rear Fog Lamp System |
| SAE J1373 | Rear Cornering Lamps For Use On Motor Vehicles Less Than 9.1 M In Overall Length |
| SAE J1432 | Rear High Mounted Stop Lamps And Rear High Mounted Turn Signal Lamps For Use On Vehicles 2032 Mm Or More In Overall Width |
| SAE J175 | Wheels – Lateral Impact Test Procedure |
| SAE J1957 | Center High Mounted Stop Lamp Standard For Vehicles Less Than 2032 Mm Overall Width |
| SAE J2039 | Side Turn Signal Lamp For Long Vehicles |
| SAE J2042 | Clearance, Sidemarker, and Identification Lamps for On-Road Vehicles 2032 mm or More in Overall Width |
| SAE J2087 | Daytime Running Lamp |
| SAE J2139 | Tests for Signal and Marking Devices Used on Vehicles 2032 mm or More in Overall Width |
| SAE J222 | Parking Lamp (Front Position Lamp) |
| SAE J2261 | Stop Lamps And Front- And Rear-Turn Signal Lamps For Use On Motor Vehicles 2032 Mm Or More In Overall Width |
| SAE J2530 | After Market Wheels – Passenger Car and Light Truck Performance Requirements and Test Procedure |
| SAE J3069 | Adaptive Driving Beam System |
| SAE J3098 | Front Decorative Lamp |
| SAE J328 | Wheels – Passenger Car and Light Truck Performance Requirements and Test Procedure |
| SAE J575 | Test Methods and Equipment for Lighting Devices for Use on Vehicles Less than 2032 mm in Overall Width |
| SAE J577 | Vibration Test Machine And Operation Procedure |
| SAE J583 | Front Fog Lamp |
| SAE J586 | Stop Lamp For Use On Motor Vehicles Less Than, Equal To, Or Greater Than 2032 Mm In Overall Width |
| SAE J587 | License Plate Illumination Devices (Rear Registration Plate Illumination Devices) |
| SAE J594 | Reflex Reflectors |
| SAE J845 | Optical Warning Devices for Authorized Emergency, Maintenance, and Service Vehicles |
| SAE J852 | Front Cornering Lamps for Use on Motor Vehicles |
| SASO 2870 | Energy efficiency, functionality and labelling requirements for general light sources |
| SASO 2902 | Energy Efficiency, Functionality and Labelling Requirements for Lighting Products Part 2 |
| SF 265 | Technical standard for the supply of FS-type moving screen permanent light signal earth electrodes and test standards |
| StVZO Nr. 287 § 30 | Guidelines for the testing and inspection of custom wheels for motor vehicles and their trailers / Richtlinien für die Prüfung von Sonderrädern für Kraftfahrzeuge und ihre Anhänger |
| StVZO TA Nr. 14b | Bicycle rearlamps |
| StVZO TA Nr. 18 | Retro-reflecting devices |
| StVZO TA Nr. 23 | Headlamps for bicycles |
| TRIAS 09−J002−01 | Test For Light-Alloy Disc Wheels |
| TRIAS 43-92 | Techical Standard for Light-Alloy Disc Wheels |
| Triumph S5048 | Instrument Pack Test Standard |
| UL 1598 | ISTMT (INSITU) |
| UL 94 | Classification and Flame-Retardant Thermoplastics |
| UN Regulation No. 104 | Uniform provisions concerning the approval of retro-reflective markings for vehicles of category M, N and O |
| UN Regulation No. 112 | Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with filament lamps and/or light-emitting diode (LED) modules |
| UN Regulation No. 113 | Uniform provisions concerning the approval of motor vehicle headlamps emitting a symmetrical passing beam or a driving beam or both and equipped with filament, gas-discharge light sources or LED modules |
| UN Regulation No. 119 | Uniform provisions concerning the approval of cornering lamps for power-driven vehicles |
| UN Regulation No. 123 | Uniform provisions concerning the approval of adaptive front-lighting systems (AFS) for motor vehicles |
| UN Regulation No. 124 | Replacement wheels for passenger cars Uniform provisions concerning the approval of wheels for passenger cars and their trailers – Disposizioni uniformi relative all’omologazione di ruote per autovetture e loro rimorchi |
| UN Regulation No. 128 | Uniform provisions concerning the approval of light emitting diode (LED) light sources for use in approved lamp units on power-driven vehicles and their trailers |
| UN Regulation No. 148 | Uniform provisions concerning the approval of light-signalling devices (lamps) for power-driven vehicles and their trailers |
| UN Regulation No. 149 | Uniform provisions concerning the approval of road illumination devices (lamps) and systems for power-driven vehicles |
| UN Regulation No. 150 | Uniform provisions concerning the approval of retro-reflective devices and markings for powerdriven vehicles and their trailers |
| UN Regulation No. 19 | Uniform provisions concerning the approval of power-driven vehicle front fog lamps |
| UN Regulation No. 3 | Uniform provisions concerning the approval of retro-reflecting devices for power-driven vehicles and their trailers |
| UN Regulation No. 38 | Uniform provisions concerning the approval of rear fog lamps for powerdriven vehicles and their trailers |
| UN Regulation No. 4 | Uniform provisions concerning the approval of devices for the illumination of rear registration plates of power-driven vehicles and their trailers |
| UN Regulation No. 41 | Uniform provisions concerning the approval of motor cycles with regard to noise |
| UN Regulation No. 45 | Uniform provisions concerning the approval of headlamp cleaners and of powerdriven vehicles with regard to headlamp cleaners |
| UN Regulation No. 5 | Uniform provisions concerning the approval of power-driven vehicle’s “sealed beam” headlamps (SB) emitting a European asymmetrical passing beam or a driving beam or both |
| UN Regulation No. 50 | Uniform provisions concerning the approval of front position lamps, rear position lamps, stop lamps, direction indicators and rearregistration-plate illuminating devices for vehicles of category L |
| UN Regulation No. 56 | UNIFORM PROVISIONS CONCERNING THE APPROVAL OF HEADLAMPS FOR MOPEDS AND VEHICLES TREATED AS SUCH |
| UN Regulation No. 57 | UNIFORM PROVISIONS CONCERNING THE APPROVAL OF HEADLAMPS FOR MOTOR CYCLES AND VEHICLES TREATED AS SUCH |
| UN Regulation No. 6 | Uniform provisions concerning the approval of direction indicators for power-driven vehicles and their trailers |
| UN Regulation No. 65 | Uniform provisions concerning the approval of special warning lamps for power-driven vehicles and their trailers |
| UN Regulation No. 69 | Uniform provisions concerning the approval of rear marking plates for slow-moving vehicles (by construction) and their trailers |
| UN Regulation No. 7 | Uniform provisions concerning the approval of front and rear position lamps, stop-lamps and end-outline marker lamps for motor vehicles and their trailers |
| UN Regulation No. 70 | Rear-marking plates for heavy and long vehicles |
| UN Regulation No. 77 | Uniform provisions concerning the approval of parking lamps for power-driven vehicles |
| UN Regulation No. 8 | UNIFORM PROVISIONS CONCERNING THE APPROVAL OF MOTOR VEHICLE HEADLAMPS EMITTING AN ASYMMETRICAL PASSING BEAM OR A DRIVING BEAM OR BOTH AND EQUIPPED WITH HALOGEN FILAMENT LAMPS (H1, H2, H3, HB3, HB4, H7, H8, H9, HIR1, HIR2 and/or H11) |
| UN Regulation No. 87 | Uniform provisions concerning the approval of daytime running lamps for power-driven vehicles |
| UN Regulation No. 88 | Uniform provisions concerning the approval of retroreflective tyres for two-wheeled vehicles |
| UN Regulation No. 91 | Uniform provisions concerning the approval of side-marker lamps for motor vehicles and their trailers |
| UN Regulation No. 98 | Uniform provisions concerning the approval of motor vehicle headlamps equipped with gas-discharge light sources |
| UN Regulation No. 10 | Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility |
| UN Regulation No. 23 | Uniform provisions concerning the approval of reversing and manoeuvring lamps for power-driven vehicles and their trailers |
| UN Regulation No. 27 | Uniform provisions concerning the approval of advance warning triangles |
| UN Regulation No. 28 | Uniform provisions concerning the approval of audible warning devices and of motor vehicles with regard to their audible signals |
| UN Regulation No. 31 | Uniform provisions concerning the approval of power-driven vehicle’s sealed-beam headlamps (SB) emitting an European asymmetrical passing-beam or a driving-beam or both |
| UNI 10772 | ITS Intelligent transport system – Systems for the processing of video images for the automatic number plate recognition |
| UNI 11356 | Light and lighting – Protocol for the measurement of LED luminaires photometric data |
| UNI EN 12966 | Road vertical signs – Variable message traffic signs – Part 1: Product standard |
| UNI EN 13032-1 | Light and lighting – Measurement and presentation of photometric data of lamps and luminaires – Part 1: Measurement and file format |
| UNI EN 13032-4 | Light and lighting – Measurement and presentation of photometric data of lamps and luminaires – Part 4: LED lamps, modules and luminaires |
| UNI EN ISO 1463 | Metallic and oxide coatings – Measurement of coating thickness – Microscopical method |
| UNI EN ISO 7731 | Ergonomics – Danger signals for public and work areas – Auditory danger signals |
| UNI ISO 9296 | Acoustics – Declared noise emission values of information technology and telecommunications equipment |
| Volvo STD 515-0003 | Electromagnetic compatibility, EMC |
| VW 80000 | Electrical and Electronic Components in Motor Vehicles up to 3,5 t |
| VW PV 5602 | Wheels Rotating Bending Test |
| VW PV 5604 | Wheels Impact Test |
| VW PV 5606 | Wheels Rim Flange Compression Test |
| VW PV 6505 | Wheels Rolling test |
| VW PV1200 | Testing the environmental cycle resistance |
| VW PV1209 | Corrosion test (environmental corrosion cycle test) |
| VW PV1210 | Body and add-on parts Corrosion test |
| VW PV2005 | Environmental cycle resistance testing of special parts, new developments and solutions |
| VW PV3929 | Weathering in dry, hot climate |
| VW PV3930 | Weathering in moist, hot climate |
| VW TL 211 | Coating of plastic exterior parts |
| VW TL 81000 | Electromagnetic Compatibility of Electronic Components for Motor Vehicles |
| VW TL244 | Surface protection requirements |
| VW TL81000 | Electromagnetic Compatibility of Electronic Components for Motor Vehicles |
| VW TL956 | Exterior Light Units for Europe/USA/Japan – functional requirements |