Lab

Why a mirror goniometer? The light source remains in its mounting position during testing, without altering its heat dissipation; high angular accuracy (up to 0.1°).

LMT GO-DS 2000 mirror photogoniometer for measuring photometric curves (LDT, IES), flux (lm), luminous efficacy (lm/W) and light pollution in accordance with various regional laws.

Main standards: LM79, LM82, TM21, EN13032-1, EN13032-4

LMT GO-H 1200 photometer for measuring intensity distribution (cd), illuminance (lx) and colour.

LMT SF100 flashing light source measurement system – effective intensity (cd).

Retroreflection measurement system – aerial luminous intensity coefficient (mcd/m², mcd/m²/lx) LMT RETRO 2000.

Luminance measurement system (cd/m²) LMT L1009.

Standards: manufacturer specifications, UN ECE regulations for lighting devices (front and rear lights, reflectors, warning triangles, flashing lights and others), international automotive standards, American FMVSS 108 and SAE standards, signalling and warning device standards (CPR 305/2011/EC)

Radiometric and colorimetric measurements with a dual monochromator spectrometer from 200 nm to 3000 nm (UV – VIS – IR).

Test measurements: these consist of measuring spectral radiance and irradiance.

Derived measurements: CCT – colour temperature, CRI – colour rendering index, colorimetric coordinates.

Available instruments:

• Semi-anechoic chamber
• Instrumentation compliant with CISPR16 (antennas, LISN, CDN)
• System for emission testing from 9 kHz to 6 GHz [radiated and conducted, Stripline method]
• System for immunity testing from 10 kHz up to 6 GHz [ALSE, BCI, Stripline methods, maximum field 300 V/m, injection current up to 300 mA]
• System for ISO pulse simulation on power supply lines
• System for ISO pulse simulation on signal lines (CCC, DCC, ICC)
• System for ESD immunity testing up to 30 kV
• Automotive magnetic immunity system
• System for Harmonics and Flicker verification
• System for Power fail / Burst / Surge verification (Max. 5 kV)

Main standards and specifications:

• ECE R10 Devices
• ECE R97 Alarm systems
• ECE R116 Alarm and anti-theft systems
• ISO 7637-2 Immunity on power supply lines
• ISO 7637-3 Immunity on signal lines
• CISPR25 Emission tests
• ISO 11452 Immunity tests
• ISO 10605 Electrostatic discharge (ESD) tests
• ISO 16750 Electrical tests
• LV124 Pulses
• Manufacturer specifications, such as: BMW GS 95002, CNH ESN0310, Ducati Standard DMH 34-03.001 Ed. 4.0, FCA CS-00056, McLaren MSL.03.04.0001, Volkswagen VW80000 and TL81000, among many others

Industrial/Lighting sector:

• EN 55015 Emission tests
• EN 55022 Emission tests
• EN 55032 Emission and Immunity tests
• EN 61000 Series: Radiated and Conducted Immunity, Burst/Surge/Power Fail Immunity

QUALILAB has:

• 9 ovens (up to 220 °C).
• 3 thermal chambers (from -70 °C to +180 °C).
• 12 climatic chambers (humidity and temperature control from -70 °C to 180 °C).
• 2 thermal shocks (from -70 °C to +180 °C).
• 2 chambers for hight humidity.
• 3 test chambers (2200x3500x2500 mm) up to 60 °C

3 Test chambers (up to 1200 liters volume) for salt spray corrosion tests (including cyclic), Kesternich and more

4 Light aging chambers (XENON source)

1 Test chamber for industrial gas corrosion

QUALILAB’s wheel division has equipment for testing the bending, rolling, impact and corrosion resistance of wheel rims. We are recognised by the KBA for the StVZO Directive, Section 30, Expl. 42, and for type approval in accordance with UN ECE R124.

We can also test the rims according to the manufacturers’ specifications.

The equipment:

• rotary bending machines (from 14‘ to 24’)
• impact testing machines
• rolling test machine

The rules:

• UNECE Regulation R124
• StVZO Directive, Section 30, Explanatory Note 42 (German Road Traffic Regulations)
• specifications of motor vehicle manufacturers
• ISO 7141, SAEJ175

QUALILAB is accredited by ACCREDIA according to UNI10772 for verification and certification of automatic license plate recognition systems.